 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
We are pleased to offer for your consideration:
ONE (1) NEW U.S. INDUSTRIAL 155 TON X 10’ CNC HYDRAULIC PRESS BRAKE
Model Number: USHB155-10
STANDARD EQUIPMENT: (All of the following comes with the Machine)
• U.S.INDUSTRIAL 2-AXIS CNC BACK GAUGE
*Controls both ram depth and back gauge. The 2GB compact flash card can hold thousands of programs
and allows up to 10 bends per program.
• Ram Deflection Adjustment
• Mechanical Ram Depth Control
• Massive Torsion Bar or Parallelism
• Forged Heavy Duty Cylinder and Cylinder Body
• Three Speed Ram
*Rapid Approach, Bending Cycle and Rapid Retreat.
• Bottom Time Delay
• All Steel Construction
• Inching, Single Cycle and Continuous Operation
• Free Gooseneck Punch and multi-opening Die for up to 90° forming in 10 gauge mild steel
*(see note on page 2)
* Sick Model 4000 Light Curtain System (For State of the Art Safety
| SPECIFICATIONS: | (**subject to change without notice**) |
| Working Pressure | 155 Tons |
| Length of Working Table | 125.9” |
| Distance Between Housings | 106.2” |
| Throat Depth | 12.5” |
| Stroke Adjustment of Ram | 2.75” |
| Ram Travel | 5.9” |
| Open Height | 16.3” |
| Ram Travel Speed | 2.4”/per sec approach |
| 2.0”/per sec return | |
| Hydraulic Oil Capacity | Dependent on Tool Load |
| Motor Horsepower | 15 HP |
| Net Weight | 22,046 lbs |
| Length | 148” |
| Width | 64” |
| Height | 101” |
PRICE…………………..…..……….F.O.B. MEMPHIS……………………....$39,980.00
AVAILABLE OPTIONS:
• CNC 2-Axis Color Graphic Control: $3,995.00
• Third Axis (Back Gauge Height): $3,995.00
• Installation and Training $ 750.00/DAY
Plus Travel Expenses.
• Special Note: The Gooseneck Punch and multi-opening Die included are general purpose tools to be used for
training only. Precision tooling should be purchased to meet your specific needs. The punch is segmented and it
is up to the customer to calibrate these if they want to use them for a particular purpose.
There is NO warranty on these items.
BACK GAUGE DRIVE SYSTEM
