 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Kent Products
KLS 1340A Manual Lathe
Key Features
•2 HP main spindle motor single phase
•8 speeds, all geared headstock
•Jog button for easy gear changes
•Hardened and ground gears and bedways
•Foot brake and T-Slot compound
•Inch/metric reading on dials
•Inch/metric ruler on tailstock quill
•ISO 9001 certified
Machine Capacity | |
| Swing over bed | 13” (330 mm) |
| Swing over cross slide | 7-1/4” (185 mm) |
| Swing over gap | 18-3/4” (476 mm) |
| Width of bed | 7 3/8” (187 mm) |
| Distance between centers | 40” (1000 mm) |
| Cross slide travel | 6-1/2” (165 mm) |
| Top slide travel | 3” (75 mm) |
Main Spindle | |
| Spindle speeds | 8 Speed |
| Spindle speed range | 70-2000 rpm |
| Through hole diameter | 1-1/2” (38 mm) |
| Spindle nose | D1-4 camlock |
| Spindle bore taper | MT #5 |
Threads | |
| Standard (Whit-worth) | 32 (4-56) tpi |
| Metric pitch | 32 (0.4-7) mm |
Feeds | |
| Longitudinal feeds | 0.0032”-0.1067” in/rev |
| Cross feeds | 0.00086”-0.0367” in/rev |
Leadscrew | |
| Leadscrew diameter | 7/8” (22 mm) |
| Thread pitch | 8 tpi |
Tailstock | |
| Quill travel | 3-5/8” (95 mm) |
| Quill diameter | 1-1/2” (40 mm) |
| Quill bore taper | MT #3 |
Power | |
| Main motor | 2 HP (110V or 220V, 1-phase) |
| Coolant pump motor | N/A |
Dimension | |
| Overall dimension | 76” x 29” x 47” (LxWxH) |
| Packing dimension | 80” x 35” x 61” (LxWxH) |
Weight | |
| Net weight | 1100 lbs |
| Gross weight | 1310 lbs |
Options & Accessories
