 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Kent Products
STRL-1340 Manual Lathe
Key Features
•Heaviest duty 13” lathe in its class
•5 HP main spindle motor
•16 speeds, all geared headstock
•Hi/Low geared speed ranges
•Jog button for easy gear changes
•Hardened and ground gears and bedways
•Cast iron machine bedways and base
•Removable chip pan for easy clean up
•Foot brake and T-Slot compound
•Inch/metric reading on dials
•Inch/metric ruler on tailstock quill
•ISO 9001 certified
Machine Capacity | |
| Swing over bed | 13-3/8” (340 mm) |
| Swing over cross slide | 8-1/4” (210 mm) |
| Swing over gap | 20” (508 mm) |
| Width of bed | 9” (230 mm) |
| Distance between centers | 40” (1000 mm) |
| Cross slide travel | 7” (180 mm) |
| Top slide travel | 4” (105 mm) |
Main Spindle | |
| 2 Speeds motor (16 Steps) | 50-2570 RPM 100-500-3000 RPM |
| Spindle speed range | 1-9/16” (40 mm) |
| Spindle nose | ASA D1-4 camlock |
| Spindle bore taper | MT #5 |
Threads | |
| Standard (Whit-worth) | 45 (2-72) tpi |
| Metric pitch | 39 (0.2-14) mm |
| Module (mm) | 18 (0.3-3.5) mod |
| Diametral | 21 (8-44) DP |
Feeds | |
| Longitudinal feeds | 0.002”-0.067” |
| Cross feeds | 0.0005”-0.015” |
Leadscrew | |
| Leadscrew diameter | 1-1/8” (28.5 mm) |
| Thread pitch | 4 tpi |
Tailstock | |
| Quill travel | 4” (105 mm) |
| Quill diameter | 2” (50 mm) |
| Quill bore taper | MT #3 |
Power | |
| Main motor | 5 HP (2-speed, 3-phase, 60 Hz) 5 HP (20 – 100 Hz) |
| Coolant pump motor | 1/8 HP (3-phase) |
Dimension | |
| Overall dimension | 81-1/2” x 31-7/8” (LxW) |
| Packing dimension | 90” x 37” x 60” (LxWxH) |
Weight | |
| Net weight | 2200 lbs |
| Gross weight | 2440 lbs |
Options & Accessories
