 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Kent Products
SSM-1340BV Manual Lathe
Key Features
•3 HP main spindle motor
•Infinitely variable spindle speeds with digital RPM display in Hi/Low gear speed ranges
•Capable of being run on single phase or 3 Phase power
•Jog button for easy gear changes
•Built-in lockable front access tool storage cabinet
•Chuck cover with interlocking limit switch
•Hardened and ground gears and bedways
•Cast iron machine bedways
•Removable chip pan for easy clean up
•Foot brake and T-Slot compound
•Inch/metric ruler on tailstock quill
Machine Capacity | |
| Swing over bed | 13” (330 mm) |
| Swing over cross slide | 8-1/4” (210 mm) |
| Swing over gap | 18-1/2” (470 mm) |
| Width of bed | 7-1/2” (190 mm) |
| Distance between centers | 40” (1000 mm) |
| Cross slide travel | 6-3/4” (170 mm) |
| Top slide travel | 3-1/2” (90 mm) |
Main Spindle | |
| 2 Speed ranges | 40-365 & 218-2000 RPM |
| Spindle speed range | 1-9/16” (40 mm) |
| Spindle nose | ASA D1-4 camlock |
| Spindle bore taper | MT #5 |
Threads | |
| Standard (Whit-worth) | 34 (2-56) tpi |
| Metric pitch | 33 (0.5-12) mm |
Feeds | |
| Longitudinal feeds | 0.0016”-0.046” |
| Cross feeds | 0.0005”-0.015” |
Leadscrew | |
| Leadscrew diameter | 7/8” (22 mm) |
| Thread pitch | 8 tpi |
Tailstock | |
| Quill travel | 4” (100 mm) |
| Quill diameter | 1-9/16” (40 mm) |
| Quill bore taper | MT #3 |
Power | |
| Main motor | 3 HP (infinitely variable speed, 3-phase or single phase) |
| Coolant pump motor | 1/8 HP (3-phase or 1Ø) |
Dimension | |
| Overall dimension | 74” x 28” (LxW) |
| Packing dimension | 77” x 30” x 60” (LxWxH) |
Weight | |
| Net weight | 1320 lbs |
| Gross weight | 1584 lbs |
Options & Accessories
