 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Kent Products
RML-1440VT Manual Lathe
Key Features
•5 HP main spindle motor using frequency drive and capable of running using single phase power
•Digital display 20–400-2500 infinitely variable spindle speeds
•Hardened and ground gears and bedways
•Cast iron machine bedways with full one piece cast base and front loading chip tray for easier cleaning
•Foot brake and T-Slot compound Inch/metric
reading on dials
•Inch/metric ruler on tailstock quill
•ISO 9001 certified
Machine Capacity | |
| Swing over bed | 14-3/16” (360 mm) |
| Swing over cross slide | 8-3/8” (214 mm) |
| Swing over gap | 21” (533 mm) |
| Width of bed | 10-1/4” (260 mm) |
| Distance between centers | 40” (1000 mm) |
| Cross slide travel | 8-11/16” (220 mm) |
| Top slide travel | 5-1/2” (140 mm) |
Main Spindle | |
| Spindle speeds | Inf. Variable (2 ranges) |
| Spindle speed range | 20-400-2500 RPM |
| Through hole spindle | 2-1/16” (52.5 mm) |
| Spindle nose | D1-6 camlock |
| Spindle bore taper | MT #6 |
Threads | |
| Standard (Whit-worth) | 45 (2-72) tpi |
| Metric pitch | 39 (0.2-14) mm |
| Module (mm) | 18 (0.3-3.5) mod |
| Diametral | 21 (8-44) DP |
Feeds | |
| Longitudinal feeds | 0.002”-0.067” |
| Cross feeds | 0.001”-0.0375” |
Leadscrew | |
| Leadscrew diameter | 1-1/8” (28.5 mm) |
| Thread pitch | 4 tpi |
Tailstock | |
| Quill travel | 6” (155 mm) |
| Quill diameter | 2” (50 mm) |
| Quill bore taper | MT #4 |
Power | |
| Main motor | 5 HP (3-phase) |
| Coolant pump motor | 1/8 HP (3-phase) |
Dimension | |
| Overall dimension | 81” x 36” x 60” (LxWxH) |
| Packing dimension | 87” x 42” x 66” (LxWxH) |
Weight | |
| Net weight | 3190 lbs |
| Gross weight | 3630 lbs |
Options & Accessories
