 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Kent Products
ML-2060T Manual Lathe
Key Features
•7.5 HP Spindle Motor, 12-Speeds
•3.125” Spindle Through Hole
•Solid Full Length Casting Base with Front Loading Chip Tray for Easier Cleaning
•Adjustable Over-load Feed Clutches
•Quick Reversal Feed from Apron
•Full-length Safety Foot Brake
•Spindle Jog Button Control
•One-shot Lubrication for Apron, Carriage, and Bed Ways
•Multi-position Adjustable Feed Position Stops
•Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang
•Heavy Duty Two Speed Tailstock
•Dual Inch/Metric Dials with Quick-change Sleeve
Machine Capacity | |
| Swing over bed | 20” (508mm) |
| Swing over cross slide | 14” (353mm) |
| Swing over gap | 27.5” (700mm) |
| Gap length (w/ face plate) | 8” (200mm) |
| Width of bed | 12” (305mm) |
| Distance between centers | 57” (1450mm) |
Headstock | |
| Spindle hole | 3.125” (80mm) |
| Spindle nose camlock | D1-6 |
| Spindle to sleeve taper | MT#7 – MT#4 |
| Spindle speed | 12 Steps, 36 – 1800 RPM |
| Spindle speed ranges | N/A |
Carriage | |
| Bearing length on ways | 17.3” (440mm) |
| Cross slide width | 7.25” (185mm) |
| Cross slide travel | 10.6” (270mm) |
| Top slide (compound) travel | 4.75” (120mm) |
Feed Box | |
| Thread capacity (inches) | 45 (2-72) tpi |
| Thread capacity (metric) | 39 (0.2-14) mm |
| Modular threads range | 18 (0.3-3.5) mod |
| Diametral pitch range | 21 (8-44) DP |
| Longitudinal feeds | 0.0015 – 0.04 IPR |
| Cross feeds | 0.00075 – 0.02 IPR |
Tailstock | |
| Quill travel | 2.3” (59mm) |
| Quill diameter | 5” (130mm) |
| Quill bore taper | MT #4 |
Power | |
| Main motor | 7.5 HP |
| Coolant pump motor | 1/8 HP (3-phase) |
| Control circuit voltage | 115 V |
Dimension | |
| Shipping dimension | 115”x39”x63” |
Weight | |
| Net weight | 4510 lbs |
| Gross weight | 5390 lbs |
Options & Accessories
