 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Kent Products
LA-2680 Manual Lathe
Key Features
•15 HP Spindle Motor, 12-Speeds
•Precision Spindle with 3 Point Support
•4.1” Spindle Through Hole
•Hardened and ground spindle gears, shafts, and bedways
•Solid Full Length Casting Base
•Full-length Safety Foot Brake
•Spindle Jog Button Control
•One-shot/Auto Lubrication for Apron, Carriage, and Bed Ways
•Multi-position Adjustable Feed Position Stops
•Dual Inch/Metric Calibrated Tailstock Quill
•Heavy Duty Two Speed Tailstock
Machine Capacity | |
| Swing over bed | 26” (660mm) |
| Swing over cross slide | 17.5” (445mm) |
| Swing over gap | 35.43” (900mm) |
| Gap length (w/ face plate) | 10.625” (270mm) |
| Width of bed | 15.75” (400mm) |
| Distance between centers | 78.75” (2000 mm) |
Headstock | |
| Spindle hole | 4.1” (104mm) |
| Spindle nose camlock | D1-11 |
| Spindle to sleeve taper | MT#7 – MT#5 |
| Spindle speed | 12 Steps, 13 – 1200 RPM |
| Spindle speed ranges | (13, 20, 30, 47, 70, 105, 150, 230, 340, 530, 800, 1200) |
Carriage | |
| Bearing length on ways | 21.5” (545mm) |
| Cross slide width | 8.625” (220mm) |
| Cross slide travel | 14” (350mm) |
| Top slide (compound) travel | 7.5” (190mm) |
Feed Box | |
| Thread capacity (inches) | 45 (2-72) tpi |
| Thread capacity (metric) | 39 (0.2-14) mm |
| Modular threads range | |
| Diametral pitch range | |
| Longitudinal feeds | 0.0014 – 0.039 IPR |
| Cross feeds | 0.0007 – 0.0195 IPR |
Tailstock | |
| Quill travel | 2.95” (75mm) |
| Quill diameter | 7” (178mm) |
| Quill bore taper | MT#5 |
Power | |
| Main motor | 15 HP |
| Coolant pump motor | 1/8 HP (3-phase) |
| Control circuit voltage | 115 V |
Dimension | |
| Shipping dimension | 138”x59”x71” |
Weight | |
| Net weight | 7480 lbs |
| Gross weight | 7920 lbs |
Options & Accessories
