 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Kent Products
KLS 26120C Manual Lathe
*Shown with KLS-2680C model
Key Features
•10 HP main spindle motor, 12 speeds
•D1-8 camlock, 4.1” spindle bore
•Hardened and ground gears and bedways
•Jog button, 4-way rapid traverse
•Mechanical clutch style headstock
•Inch dials and leadscrews
•Centralized lube system in headstock
•Safety Foot brake
Machine Capacity | |
| Swing over bed | 26” (660 mm) |
| Swing over cross slide | 16.5” (420 mm) |
| Swing over gap | 34” (870 mm) |
| Effective gap length | 9” (240 mm) |
| Width of bed | 16” (400 mm) |
| Distance between centers | 120” (3048 mm) |
| Cross slide travel | 12.2” (310 mm) |
| Top slide travel | 5.75” (145 mm) |
Main Spindle | |
| Spindle speeds | 12 speeds |
| Spindle speed range | 36-1600 rpm |
| Through hole diameter | 4.12” (105 mm) |
| Spindle nose | D1-8 camlock |
| Spindle bore taper | MT #6 with sleeve |
Threads | |
| Standard (Whit-worth) | 40 (4-112) tpi |
| Metric pitch | 22 (0.45-7.5) mm |
| Module (mm) | 14 (0.75 to 7) mm |
| Diametral | 24 (4 to 56) dp |
Feeds | |
| Longitudinal feeds | 0.0024”-0.0992” in/rev |
| Cross feeds | 0.0011”-0.042” in/rev |
Leadscrew | |
| Leadscrew diameter | 1-9/16” (40 mm) |
| Thread pitch | 2 tpi |
Tailstock | |
| Quill travel | 6” (150 mm) |
| Quill diameter | 2.9” (75 mm) |
| Quill bore taper | MT #5 |
Power | |
| Main motor | 10 HP (3-phase) |
| Coolant pump motor | 1/8 HP (3-phase) |
Dimension | |
| Overall dimension | 177” x 45” x 57” (LxWxH) |
| Packing dimension | 185” x 55” x 84” (LxWxH) |
Weight | |
| Net weight | 8580 lbs |
| Gross weight | 9180 lbs |
Options & Accessories
