Kent Products

KLS 1760(II) Manual Lathe

*KLS-1740 Model Shown

Key Features

•6 HP main spindle motor

•12 speeds, all geared headstock

•Hardened and ground gears and bedways

•Centralized lube system in headstock

•Cast iron machine bedways and base

•Removable chip pan for easy clean up

•Foot brake and T-Slot compound

•Inch/metric ruler on tailstock quill

•ISO 9001 certified manufacturer

Back to Kent Products

Machine Capacity
Swing over bed	17” (435 mm)
Swing over cross slide	10.2” (260 mm)
Swing over gap	22” (560 mm)
Effective gap length	7.87” (200 mm)
Width of bed	12-1/4” (315 mm)
Distance between centers	60” (1500 mm)
Cross slide travel	9.26” (235 mm)
Top slide travel	4” (100 mm)

 

Main Spindle
Spindle speeds	12 speeds (2 ranges)
Spindle speed range	32-1800 rpm
Through hole diameter	2-1/32” (52 mm)
Spindle nose	D1-6 camlock
Spindle bore taper	MT #6

 

Threads
Standard (Whit-worth)	65 (1-5/8 to 72) tpi
Metric pitch	28 (0.5 to 20) mm
Module (mm)	25 (0.25 to 10) mm
Diametral	45 (3-1/4 to 96) dp

 

Feeds
Longitudinal feeds	0.0014”-0.0439” in/rev
Cross feeds	0.0010”-0.0330” in/rev

 

Leadscrew
Leadscrew diameter	1.33” (34 mm)
Thread pitch	4 tpi

 

Tailstock
Quill travel	4-3/4” (95 mm)
Quill diameter	2.36” (60 mm)
Quill bore taper	MT #4

 

Power
Main motor	6 or 4 HP (2-speed, 3-phase)
Coolant pump motor	1/8 HP (3-phase)

 

Dimension
Overall dimension	115” x 40” x 47” (LxWxH)
Packing dimension	125” x 44” x 62” (LxWxH)

 

Weight
Net weight	4,450 lbs
Gross weight	4,670 lbs

 

Options & Accessories