 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Kent Products
HR-3080 Manual Lathe
*HR-35120 model shown
Key Features
•20 HP Spindle Motor, 12-Speeds
•4.1” (6.1” Opt)Spindle Through Hole
•Solid One Piece Full Length Casting
Base and Bedways for Maximum Rigidity
•Spindle Jog Button Control
•One-shot Lubrication for Apron, Multi-position Adjustable Feed Position Stops
•Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang
•Heavy Duty Two Speed Tailstock
•Dual Inch/Metric Dials with Quick-change Sleeve
Machine Capacity | |
| Swing over bed | 30.7” (780mm) |
| Swing over cross slide | 21.25” (540mm) |
| Swing over gap | 42.1” (1070mm) |
| Gap length (w/ face plate) | 19” (482mm) |
| Width of bed | 18” (458mm) |
| Distance between centers | 80” (2000mm) |
Headstock | |
| Spindle hole | 4.1” (105mm) (Optional 6.1” (155mm)) |
| Spindle nose camlock | D1-11 or A1-11 (A2-11 for 6” bore spindle) |
| Spindle to sleeve taper | 1/21.6 – MT#5(1/19.002 – MT#5 for 6” bore spindle) |
| Spindle speed | 12 Steps, (12, 20, 29, 40, 55, 85, 120, 175, 300, 445, 650, 1000), (10, 17, 25, 36, 47, 70, 100, 150, 245, 370, 540, 800 for 6” bore spindle style) RPM |
| Spindle speed ranges | N/A |
Carriage | |
| Bearing length on ways | 32” (815mm) |
| Cross slide width | 10.2” (260mm) |
| Cross slide travel | 15.35” (390mm) |
| Top slide (compound) travel | 9.4” (240mm) |
Feed Box | |
| Thread capacity (inches) | 36 (2-28) tpi |
| Thread capacity (metric) | 65 (0.8-14) mm |
| Modular threads range | 22 (0.5-7) mod |
| Diametral pitch range | 21 (8-44) DP |
| Longitudinal feeds | 0.002 – 0.0276 IPR |
| Cross feeds | 0.001 – 0.0138 IPR |
Tailstock | |
| Quill travel | 4.133” (105mm) |
| Quill diameter | 8.3” (210mm) |
| Quill bore taper | MT#6 |
Power | |
| Main motor | 20 HP |
| Coolant pump motor | 1/8 HP |
| Control circuit voltage | 24 V |
Dimension | |
| Shipping dimension | 151”x69”x73” |
Weight | |
| Net weight | 8580 lbs |
| Gross weight | 9130 lbs |
Options & Accessories
