 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Kent Products
HL-44200 Manual Lathe
*Shown with HL-3780 model
Key Features
•20 HP Spindle Motor, 16-Speeds
•5.98” Spindle Through Hole
•Extra Heavy Ribbed One Piece Bedways and Base
•Spindle Jog Button Control
•One-shot Lubrication for Apron, Carriage, and Bed Ways
•Two Speed Tailstock
•Magnetic Clutch Brake
•4 Way Rapid Feed
Machine Capacity | |
| Swing over bed | 44” (1120mm) |
| Swing over cross slide | 31-7/8” (810mm) |
| Swing over gap | 61” (1550mm) |
| Gap length (w/ face plate) | 17-7/8” (450mm) |
| Width of bed | 24” (610mm) |
| Distance between centers | 200"(5m) |
Headstock | |
| Spindle hole | 6” (152mm), Opt. 9" or 12" |
| Spindle nose camlock | ASA A2-11 |
| Spindle to sleeve taper | |
| Spindle speed | 16 Steps, 4 – 420 RPM |
| Spindle speed ranges | N/A |
Carriage | |
| Cross slide travel | 23.6” (600mm) |
| Top slide (compound) travel | 13.78” (350mm) |
Feed Box | |
| Thread capacity (inches) | 1/4 - 30 tpi |
| Thread capacity (metric) | 1 - 120 mm |
| Modular threads range | 0.25 - 30 m |
| Diametral pitch range | 1 – 120 dp |
| Longitudinal feeds | 0.00236 – 0.277 ipr |
| Cross feeds | 0.00118 – 0.138 ipr |
Tailstock | |
| Quill travel | 12” (305mm) |
| Quill diameter | 4-1/2” (115mm) |
| Quill bore taper | MT#6 |
Power | |
| Main motor | 20 HP |
| Coolant pump motor | 1/8 HP |
| Control circuit voltage | 115 V |
Dimension | |
| Shipping dimension | 280" x 60-1/4" x 67” (LxWxH) |
Weight | |
| Net weight | 22,000 lbs |
| Gross weight | 25,960 lbs |
Options & Accessories
OPTIONS AND ACCESSORIES:
