 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Kent Products
CTL-618EVS Manual Lathe
Key Features
•0-4000 infinitely variable spindle speeds using electronic vector drive
•1-1/16” 5C thru-collet capacity
•Induction hardened and ground alloy steel bedways for extra longevity
•Full-bearing carriage
•T-Slot compound
•Inch/metric reading on dials
Machine Capacity | |
| Swing over bed | 11” (280 mm) |
| Swing over cross slide | 6” (152 mm) |
| Swing over gap | 9” (229 mm) |
| Width of bed | 6-3/4” (172 mm) |
| Distance between centers | 18” (457 mm) |
| Cross slide travel | 6” (153 mm) |
| Top slide travel | 3” (76 mm) |
Main Spindle | |
| Spindle speeds | Inf. Variable |
| Spindle speed range | 0-4000 rpm |
| Spindle nose taper (I) | 5C (10º) |
| Spindle nose taper (O) | 4º |
Threads | |
| Standard (Whit-worth) | 36 (11-108) tpi |
| Metric pitch | 36 (0.275-2.7) mm |
Feeds | |
| Longitudinal feeds | 5/16”-7” per minute |
| Cross feeds | 5/16”-4” per minute |
Leadscrew | |
| Leadscrew diameter | 1” |
| Thread pitch | 8 tpi |
Tailstock | |
| Quill travel | 3.75” (95 mm) |
| Quill diameter | 1.358” (34.5 mm) |
| Quill bore taper | MT #2 |
Power | |
| Main motor | 3 HP (3-phase) |
| Coolant pump motor | 1/4 HP (3-phase) |
Dimension | |
| Overall dimension | 65” x 28” x 58” (LxWxH) |
| Packing dimension | 85” x 36” x 68” (LxWxH) |
Weight | |
| Net weight | 2300 lbs |
| Gross weight | 2450 lbs |
Options & Accessories
